Zetuvit® Plus Silicone

The silicone layer in contact with the wound allows easy application and almost painless, atraumatic removal. The absorbent pad absorbs and retains the exudate.

Zetuvit Plus Silicone is a sterile dressing for the treatment of moderately to highly exuding, acute and chronic wounds. The silicone layer in contact with the wound allows easy application and almost painless, atraumatic removal. The absorbent pad absorbs and retains the exudate.

Zetuvit Plus Silicone is a single use sterile superabsorbent dressing with a silicone interface for long-term treatment of injured skin, acute and chronic wounds, with moderate to high levels of exudate. It is used on adults only, by healthcare professionals in clinical or homecare environments and can be combined with local antiseptics, primary and secondary dressings and under compression.

Assortment
Application

Clean the wound using a physiological solution or as instructed by a clinician. •Select a suitable dressing size for the wound making sure that the dressing overlaps the margins of the wound by approx. 1 – 2 cm. Do not cut the dressing. •Before applying the dressing, after rinsing the wound, make sure that the area around the wound is dry using swabs to ensure that the dressing adheres. •Remove the protective sheets. Place the dressing with the adherent side onto the wound, so that the green side faces away from the wound. •Secure the dressing using e.g. a Peha-haft bandage or any other suitable fixation, or, if need be, with compression bandages as instructed by a clinician. •A dressing can remain on the wound for up to 5 days, depending on the condition of the wound and the established clinical protocol. The dressing must be changed if clinically indicated or when exudate reaches the rim of the dressing

Zetuvit Plus Silicone

Zetuvit Plus Silicone + Peha-haft Application Video GB

WEBVTT 1 00:00:00 --> 00:00:17 Select dressing Select a suitable size of Zetuvit Plus Silicone and remove the protective sheets 2 00:00:17 --> 00:00:30 Place on wound Place dressing onto the wound and remove remaining protective sheets 3 00:00:30 --> 00:00:47 Wrap Peha-haft around the ankle Wrap Peha-haft around the ankle making sure that no tension is applied on the bandage 4 00:00:47 --> 00:00:56 Wrap Peha-haft around the leg Wrap Peha-haft around the leg making sure that no tension is applied on the bandage 5 00:00:56 --> 00:01:02 Cut and press down Cut and press the bandage. Make sure that the bandage is not wrapped too tight

Zetuvit Plus Silicone + Omnifix Silicone Application Video GB

WEBVTT 1 00:00:00 --> 00:00:14 Select dressing Select a suitable size of Zetuvit Plus Silicone 2 00:00:14 --> 00:00:36 Remove protective sheets Remove the protective sheets 3 00:00:36 --> 00:00:47 Secure with Omnifix Silicone Secure the dressing by using Omnifix Silicone 4 00:00:47 --> 00:00:52 Pull on both sides Pull slightly on both sides of the wave cut 5 00:00:52 --> 00:01:07 Remove first protective sheet Remove one of the protective sheets following the arrows 6 00:01:07 --> 00:01:23 Remove second protective sheet Remove the other protective sheet 7 00:01:23 --> 00:01:38 Repeat on other side Repeat this with a second stripe of Omnifix Silicone
Downloads

Learning & Knowledge